 |
|
 |
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
| CAMSHAFT APPLICATION GUIDE |
| The "Camshaft Application Guide" Section of this catalog is a baseline guide to help you find a camshaft that will fit your application on a general basis. The cams found in this section are not stocked on our shelves and are still considered custom ground cams. In order for you to take full advantage of our service, we recommend letting us set you up with a camshaft that is tailored to your individual engine combination. After looking at the previous section of this catalog, you will note that there are literally thousands of different camshaft combinations that can be ground. You can use one intake lobe from one cam series and an exhaust lobe from another cam series and grind them on a variety of different lobe separations. The Reed Cams Technical/Sales Dept. will help you make these decisions, based on our years of experience and research. Again, use this guide only as a general reference to your individual application. Mechanical Flat Tappet Cams Solid Roller Cams If you need further assistance use the Cam Design Form |
|
164 Andrew Drive | Suite 600 | Stockbridge, Ga 30281 | tech 770.474.6664 | fax 770.474.7320 | orders 1.800.548.2267
|